
|
Part No. |
Service Pressure |
Diameter |
Length |
Empty Weight |
Oxygen Capacity |
Nitrogen Capacity |
H2O Capacity |
Standard Thread Size* |
| (p.s.i. / bar) | (in / mm) | (in / mm) | (lbs / kgs) |
(ft3 / liters) |
(ft3 / liters) |
(lbs / liters) |
||
| I-150 | 2015 / 139 | 8.00 / 203.2 | 47.0 / 1194 | 48.8 / 22.1 | 150.0 / 4248 | 138.8 / 3931 | 63.7 / 28.9 | 1.125-12UNF-2B |
| I-122 | 2216 / 153 | 8.00 / 203.2 | 36.2 / 919 | 39.5 / 17.9 | 122.0 / 3455 | 113.0 / 3199 | 47.1 / 21.4 | 1.125-12UNF-2B |
| I-90 | 2216 / 153 | 7.25 / 184.2 | 32.6 / 828 | 30.3 / 13.7 | 90.0 / 2549 | 82.9 / 2348 | 34.7 / 15.7 | 1.125-12UNF-2B |
| I-60 | 2216 / 153 | 7.25 / 184.2 | 22.9 / 582 | 22.3 / 10.1 | 60.0 / 1699 | 55.4 / 1569 | 23.1 / 10.5 | 1.125-12UNF-2B |
| I-48 | 2216 / 153 | 5.25 / 153.4 | 32.2 / 818 | 15.2 / 6.9 | 48.2 / 1365 | 44.6 / 1263 | 18.6 / 8.4 | 1.125-12UNF-2B |
| I-33 | 2216 / 153 | 6.89 / 175.0 | 14.9 / 378 | 13.8 / 6.3 | 33.0 / 935 | 30.5 / 864 | 12.7 / 5.7 | 1.125-12UNF-2B |
| I-22 | 2216 / 153 | 5.25 / 133.4 | 16.3 / 414 | 8.0 / 3.6 | 22.0 / 623 | 20.4 / 577 | 8.5 / 3.9 | .750-16UNF-2B |
| I-6 | 2216 / 153 | 3.20 / 81.0 | 11.8 / 300 | 2.3 / 1.0 | 6.0 / 170 | 5.6 / 157 | 2.3 / 1.0 | .750-16UNF-2B |
Ask for Catalina Cylinders industrial products at your local welding supply store.* Other thread sizes (i.e. 3/4-14NGT, 25E, etc.) available upon request.
MATERIAL: Every cylinder is produced from high strength aluminum alloy 6061-T6.
MARKINGS: Cylinders are stamped with required U.S. Department of Transportation (DOT) and Transport Canada (TC) Markings.
FINISH: Standard finish is brushed body with natural unpainted dome. Heat sensitive clear coat finish of full cylinder is available.
VALVES: CGA designation valves installed upon request.
ACCESSORIES: Carrying handle installed on I33, I60, I90, I122 and I150 only. These sizes are also available with valve protection caps..
CLEANING: Cylinders are provided commercially clean.
REGULATION & INSPECTION: All seamless aluminum alloy compressed gas cylinders are manufactured in accordance with U.S. DOT 3AL and TC 3ALM requirements. Every cylinder is inspected and tested by a DOT and TC authorized independent inspection agency.Rev. 02/08

|
[Home] [About Us] [Products] [What's New] [Technical Support] |
|
[Medical] [CO2] [SCUBA] [Low Pressure] |
Please contact our Webmaster
with questions or comments.
© Copyright 1999 Catalina Cylinders. All rights reserved.