|
Part No. |
Service Pressure |
Diameter |
Length |
Empty Weight |
Oxygen |
Water |
Standard Thread Size* |
|
(psi / bar) |
(in / mm) |
(in / mm) |
(lbs / kgs) |
(cu ft / liters) |
(lbs / liters) |
|
|
| M150 | 2015 / 139 | 8.00 / 203.2 | 47.0 / 1194 | 48.8 / 22.1 | 150.0 / 4248 | 63.7 / 28.9 | 1.125-12UNF-2B |
| M122 | 2216 / 153 | 8.00 / 203.2 | 36.2 / 919 | 39.5 / 17.9 | 122.0 / 3455 | 47.1 / 21.4 | 1.125-12UNF-2B |
| M90 | 2216 / 153 | 7.25 / 184.2 | 32.6 / 828 | 30.3 / 13.7 | 90.0 / 2549 | 34.7 / 15.7 | 1.125-12UNF-2B |
| M60 | 2216 / 153 | 7.25 / 184.2 | 22.9 / 582 | 22.3 / 10.1 | 60.0 / 1699 | 23.2 / 10.5 | 1.125-12UNF-2B |
| ME | 2015 / 139 | 4.38 / 111.3 | 25.4 / 645 | 7.8 / 3.6 | 24.0 / 679 | 10.2 / 4.6 | .750-16UNF-2B |
| M22 | 2216 / 153 | 5.25 / 133.4 | 16.3 / 414 | 8.0 / 3.7 | 22.0 / 623 | 8.5 / 3.9 | .750-16UNF-2B |
| MD | 2015 / 139 | 4.38 / 111.3 | 16.7 / 424 | 5.4 / 2.4 | 15.0 / 425 | 6.4 / 2.9 | .750-16UNF-2B |
| M9 | 2015 / 139 | 4.38 / 111.3 | 10.9 / 277 | 3.7 / 1.7 | 9.0 / 255 | 3.8 / 1.7 | .750-16UNF-2B |
| ML7 | 2015 / 139 | 4.38 / 111.3 | 9.1 / 231 | 3.2 / 1.5 | 7.0 / 198 | 3.0 / 1.4 | .750-16UNF-2B |
| ML6 | 2015 / 139 | 4.38 / 111.3 | 7.8 / 198 | 2.9 / 1.3 | 6.0 / 170 | 2.5 / 1.2 | .750-16UNF-2B |
| M6 | 2216 / 153 | 3.21 / 81.5 | 11.8 / 300 | 2.3 / 1.0 | 6.0 / 170 | 2.3 / 1.0 | .750-16UNF-2B |
| M4 | 2216 / 153 | 3.21 / 81.5 | 8.7 / 221 | 1.7 / .8 | 4.0 / 113 | 1.5 / .7 | .750-16UNF-2B |
| M2 | 2216 / 153 | 2.50 / 63.5 | 5.7 / 145 | .70 / .3 | 1.5 / 42 | .6 / .3 | .750-16UNF-2B |
* Other thread sizes available upon request.
MATERIAL: Every cylinder is produced from high strength aluminum alloy 6061-T6.
FINISH: Standard oxygen cylinder finish is brushed body with green dome (white dome for Canada) and heat sensitive clear coat finish.
VALVES: CGA designation valves installed upon request.
ACCESORIES: The M150, M122, M90 and M60 are available with either a carrying handle or collar and valve protective cap.
REGULATION & INSPECTION: All seamless aluminum alloy compressed gas cylinders are manufactured in accordance with U.S. Departmenet of Transportation (DOT) 3AL and Transport Canada (TC) 3ALM requirements. Every cylinder is inspected and tested by a DOT and TC authorized independent inspection agency.rev. 01/08
|
[Home] [About Us] [Products] [What's New] [Technical Support] |
|
[CO2] [Industrial] [SCUBA] [Low Pressure] |
 |
Catalina Cylinders - West |
|
Catalina Cylinders - East |
|
Please contact our Webmaster
with questions or comments.
© Copyright 1999 Catalina Cylinders. All rights reserved.
